Honeywell Centraline FALCON User Manual page 169

USER GUIDE
Here you can copy a switchpoint from one single source weekday
to one or multiple destination weekdays.
Under Source Weekday, the source weekday is displayed. Under
Destination Weekday(s), you select the Destination Weekday(s).
Under Mode, you can define how duplication conflicts should be
handled, for example, if the source switchpoint is on 7.00 and the
target weekday already contains a switchpoint on 7.00.
33. Under Destination Weekday(s), click the weekday in the list. Multiselection by
using the CTRL or the SHIFT key is possible. To select/unselect all points in
one step use the SELECT ALL or the UNSELECT ALL button.
34. Under Mode, select the mode by clicking the desired radio button at:
Overwrite complete day(s)
All existing switchpoints in the destination weekday(s) are deleted
Overwrite duplicates
Destination switchpoints with the same time as the source switchpoint are
overwritten by the source switchpoint.
Do not overwrite duplicates
Destination switchpoints with the same time as the source switchpoint are not
overwritten by the source switchpoint.
35. To save settings, click the OK button.
RESULT: The New / Edit Schedule dialog box redisplays.
36. Click the SUBMIT button.
37. Continue by clicking the Exceptions tab.
165
FALCON
EN2Z-0962GE51 R0715