Honeywell Centraline FALCON User Manual page 145

USER GUIDE
NOTE: The user can only create and delete a fast access list if his/her access level
is equal to or higher than the access level defined for these actions.
Otherwise the CREATE and DELETE buttons are not displayed.
A fast access list is only displayed for the user if the user's read access
level is equal to or higher than the read access level of the fast access list.
Procedure 1. In the tree on the left, expand the tree and navigate to the item (either controller
or plant) you want to create the fast access list for.
2. Click on Fast Access Lists.
If available all existing user-defined fast access lists are displayed on the Fast
Access Lists tab. A fast access list can be created either as
datapoint/parameter overview or as filter template.
3. In the Name column, the fast access lists are listed by name.
4. In the Type column, the type (datapoint/parameter overview or filter template) is
shown.
5. To create a new fast access list, click the NEW button.
RESULT:
6. On the General tab, enter a name in the Name field.
7. From the Type drop-down list box, select the fast access list type under:
Selected Points/Parameters
Allows watching the impact of changed parameter values on datapoints. The
parameter values are changed online.
Filter Template
Allows quickly displaying certain datapoints of a plant.
NOTE: If this option is selected, the Assign Parameters tab will not be
The New / Edit Fast Access List dialog box displays.
available.
141
FALCON
EN2Z-0962GE51 R0715