Honeywell Centraline FALCON User Manual page 241

USER GUIDE
Display Settings
rrr. Select how the parameters should be displayed by clicking corresponding
radio button:
• Drill Down View
Displays parameters of the plant/control loop as hierarchical structure.
Parameters can be accessed by navigating through the hierarchical
structure. Only the parameters of the current selected level (plant or control
loop) are displayed.
Example:
Since the plant itself has no parameters, on plant level only the control icons
are displayed as folders.
• Flat View
Displays parameters of the plant as non-hierarchical structure. All
parameters of selected loops are listed concurrently with their path.
Parameters can be filtered by control loop assignment, path and name.
NOTE: Only the parameters of those control loops are displayed of which read
access level is equal to or lower than the access level of the user.
You can only change values of parameters that belong to control loops
of which read access level is equal to or lower than the access level of
the user.
Parameters (Drill Down View)
If Drill Down View has been selected as display type, the parameters of the
plant are displayed as hierarchical structure (drill down view). A tool icon
indicates parameters. Folder icons below the parameters indicate control
macros. Parameters can be accessed by navigating through the hierarchical
structure. While navigating, the current path (separated by dots) will be
displayed in the Path field. Downward navigation is done by clicking on the
entry in the Name column. Upward navigation is done by clicking on the
Upward icon at the Path field.
237
FALCON
EN2Z-0962GE51 R0715