Honeywell Centraline FALCON User Manual page 235

USER GUIDE
Alarm Filter
Here you can create an alarm filter for displaying alarms by status (new, all),
category (urgent, high, low) and by time range in the alarm list.
2. Under Filter by Status, select the status by clicking the radio button:
• Only New
Displays new alarms of the defined time range.
• All
Displays all alarms, regardless of their status, of the defined time range.
3. Under Filter by Category, mark the category under:
• Urgent
Displays all alarms with urgent priority
• High
Displays all alarms with high priority
• Low
Displays all alarms with low priority
Multiselection by using the SHIFT or the CTRL key is possible.
4. To define the time range, do the following:
nnn. Click the Start Date checkbox and enter the start date into the fields or
select date by clicking the BROWSE button.
ooo. In the Time fields enter the time.
NOTE:
If the checkbox is unchecked, the fields are disabled. This means, that alarms
of any date up to and including the end date, will be displayed.
ppp. Click the Stop Date checkbox and enter the end date into the fields or
select date by clicking the BROWSE button.
qqq. In the Time fields enter the time.
NOTE:
If the checkbox is unchecked, the fields are disabled. This means, that alarms
of any date from the start date on will be displayed.
NOTE:
If both fields are disabled, all alarms of the alarm buffer will be displayed.
231
FALCON
EN2Z-0962GE51 R0715