Honeywell Centraline FALCON User Manual page 100

FALCON
EN2Z-0962GE51 R0715
2. Click the Manual radio button and enter the value into the field.
Or, to override an analog or binary output datapoint physically, adjust the
override control on the module.
3. To detect if a datapoint is in manual override, select the Command Properties
tab.
RESULT: The priority level ´8 Manual Operator` shows the manual value
which is overwritten via value input in the Excel Web HTML
Interface or EBI central (all datapoints). This is often called "fixing a
Point".
96
USER GUIDE