HP 9000 Series Service Manual page 429

---Service Help---------------------------------------------------
The Service menu consists of commands that are used
personnel to view information about the system for the purpose
of system service operations.
Type DIsplay to view the commands available from this menu.
Other menus can be accessed by entering the name of the menu at the
command prompt. From a given menu, a command from any other menu can
be executed by entering the menu name that is associated with the
command, followed by the command.
For example, to execute the DaTe command (in the Configuration menu)
from the Service menu, type "co dt".
Type HElp MAin to see all available commands listed under their
respective menus.
----
---Clearpim Help ----------------------------------------------------
Clearpim allows the user to clear (zero) the contents of PIM
----
---Auto Help -------------------------------------------------------------
AUto displays or sets the AUTOBOOT and AUTOSEARCH flags
in Stable Storage.
If AUTOBOOT is ON, the operating system is automatically
loaded after a system power-up or reset.
If AUTOSEARCH is ON, the system searches for all possible boot devices.
AUto
AUto BOot
AUtoSEArch
AUto ON
AUto OFF
AUto SEArch ON
AUto SEArch OFF
AUto BOot ON
AUto BOot OFF
Short command for AUto: au
-----
Appendix B
Display the state of AUTOBOOT/AUTOSEARCH flags
Display the state of AUTOBOOT flag
Display the state of AUTOSEARCH flag
Turn on AUTOBOOT and AUTOSEARCH flags
Turn off AUTOBOOT and AUTOSEARCH flags
Turn on AUTOSEARCH
Turn off AUTOSEARCH
Turn on AUTOBOOT
Turn off AUTOBOOT
Support Information
by service
B-25