HP 9000 Series Service Manual page 423

------- Search Help -----------------------------------------------------
SEArch is used to search for boot devices in the system.
SEArch
SEArch <path>
SEArch IPL
SEArch IPL <path> Search specified path for bootable devices withIPL
SEArch DIsplay
<path> is a module path defined in I/O notation, such as
1/2/3 or 8 (layers are ignored).
The first 20 devices found will be displayed.
The devices found will have a path label such as P0, P1, ...P19
.
These labels can be used in the BOot command to select
a specific device.
Example:
Short command for SEArch: sea
---------
----- BootTimer Help ------------------------------------------------
BootTimer is used to display or set the time allowed for booting.
BootTimer
BootTimer xxxx
Short command for BootTimer: bt
------
----- Fastboot Help --------------------------------------------------
FastBoot speeds up system boot time by causing a quick memory read
test to be performed.
In addition, other selected tests are skipped.
FastBoot
FastBoot ON
FastBoot OFF
Short Command for FastBoot: fb
------
----- Display Help ----------------------------------------------------
Display (or LiSt) redisplays the current menu.
Short command for DIsplay: di
------
Appendix B
Search for all potential boot devices
Search specified path for potential boot devices
Search for all bootable devices with IPL
Display the results of the previous search
boot P1
Display value of Boot Timer in seconds
Set Boot Timer to xxxx seconds
where xxxx = 0 - 1000
Display current setting of Fastboot
Turn Fastboot on
Turn Fastboot off
Support Information
B-19