HP 9000 Series Service Manual page 420

Support Information
-----IO Help---------------------------------------------------------
IO displays I/O interface information on all modules in the system.
------
----- Memory Help --------------------------------------------------
MEmory displays the amount of available memory and the amount of
configured memory.
MEmory displays the following information:
Physical Memory:
Configured Memory:
Short command for MEmory: me
-----------
----- Processor Help -----------------------------------------------------
PRocessor displays information about the processors present
in the system and some system-wide information as well.
NOTE: Processor number is same as assembly board designation.
Processors in a Stopped state are in this state due to:
Deconfigured:
NonResponding:
Failed:
Short Command for PRocessor: pr
--------
----- FwrVersion Help --------------------------------------------
FwrVersion displays the version of firmware.
Short command for FwrVersion: fv
-------
B-16
Total amount of memory in the system
Usable memory that has been configured
Processor deconfigured due to a request
prior to the current boot
Processor does not respond to wake up,
selftests, etc.
Processor failed one or more selftests
Appendix B