HP 9000 Series Service Manual page 413

------Information Menu------------------------------------------------
Command
-------
ALL
BootINfo
CAche
ChipRevisions
COProcessor
FwrVersion
IO
LanAddress
MEmory
PRocessor
WArnings
BOot [PRI|ALT|<path>
DIsplay
HElp [<menu>|<command>]
RESET
MAin
-------
Information Menu: Enter command >
--Service Menu--------------------------------------------------------
Command
-------
BootID [<proc>] [<boot ID>]
ChassisCodes [<proc>]
ClearPim
CPUconfig [<proc>] [ON|OFF]
EempromRead [<addr>] [<len>]
MemRead <addr> [<len>]
PDT [CLEAR]
PIM [<proc>[HPMC|LPMC|TOC]]
BOot [PRI|ALT|<path>]
DIsplay
HElp [<menu>|<command>]
RESET
MAin
-------
Service Menu:
Appendix B
Enter command >
Description
-----------
Display all system information
Display boot-related information
Display cache information
Display revisions of VLSI and firmware
Display coprocessor information
Display firmware version
Display I/O interface information
Display built-in LAN address
Display memory information
Display processor information
Display selftest warning messages
Boot from specified path
Redisplay the current menu
Display help for menu or command
Restart the system
Return to Main menu
Description
-----------
Display or modify processor boot ID
Display chassis codes
Clear (zero) the contents of PIM
Config/deconfig processor
Read EEPROM locations
Read memory locations
Display or clear
Display PIM information
Boot from specified path
Redisplay the current menu
Display help for menu or command
Restart the system
Return to Main menu
Support Information
B-9