HP 9000 Series Service Manual page 207

7
Dx20/Dx30 Front Panel LCD Codes
This chapter lists PDC Chassis Codes and Error Codes displayed on the system console
and on the front panel LCD display located on the SPU cabinet for models D220, D320,
D230, and D330.
Each code consists of four hex digits, D0, D1, D2, and D3. D0 is the Major code category.
The categories are 0 through F and are defined in Table 7-1. The display codes are listed
in numerical order by SPU function within the Tables in this chapter.
• The first column of the tables contains the operating state (ostat) of the computer.
The ostat values are:
OFF
FLT (fault)
TEST
INIT (initialize)
SHUT (shutdown)
WARN (warning)
RUN
ALL
• The second column contains the chassis code.
• The third column contains a description of the codes meaning.
Chapter 7
Dx20/Dx30 Front Panel LCD Codes
7- 1