Table 4-13 Boot Device Initialization And Ipl Codes For Primary Path - HP 9000 Series Service Manual

Table 4-13 Boot Device Initialization and IPL codes for primary path.

Ostat Code
INIT C500 GET_PRI_PATH
INIT C540 INIT_PRI_PATH
INIT C550 TEST_PRI_PATH
INIT C580 LOAD_IPL_PRI_PATH
WARN C5F0 PRI_IPL_FAULT
FLT C5F0 PRI_IPL_FAULT_FATAL
WARN C5F1 BAD_IPL_ADDR_PRI
WARN C5F2 BAD_LIF_MAGIC_PRI
WARN C5F3 BAD_IPL_SIZE_PRI
WARN C5F4 BAD_IPL_ENTRY_PRI
WARN C5F8 BAD_IPL_CHECKSUM_PRI
WARN C5FF LAUNCH_IPL_PRI
Chapter 4
Name
Retrieving the primary boot path. (i.e. the
Stable Storage path).
Initializing the primary boot path.
Calling ENTRY_TEST for the primary boot
path.
Loading IPL from the primary boot device.
An error occurred reading IPL from boot
media.
An error occurred reading IPL from boot
media and there was no console.
LIP file address is not 2K byte aligned or it
is zero.
LIF file not present on media.
LIF file is not a multiple of 2K bytes, is zero
or it is greater than 256K bytes.
LIF file entry point is not word aligned or is
greater than or equal to the size.
The arithmetic sum of the words in IPL 0.
Branching to IPL from the primary boot
device.
D200/D210/D310 Front Panel LCD Codes
Meaning
4- 21