Procedure C: - HP 9000 Series Service Manual

Support Information
6. Press f2 (ok)
7. Press f8 (previous menu)
8. Press f5 (tools)
9. Press f2 (information)
10. Press f2 (run)
11. Press f3 (info log)
After a few seconds, the Information Tool Log for the CPU will be displayed. The 'PDC Firmware
Revision' is displayed in the first column.
12. Note the PDC Firmware value.
13. Press f2 (done)
14. Press f8 (previous menu)
15. Press f8 (previous menu)
16. Press f8 (exit)
17. Press f2 (ok)

Procedure C:

For HP-UX systems with 10.20 and later and Support Tools Manager version is A.08.00 or later
1. Press f2 (ok)
2. Move the cursor to "CPU"
3. Press f3 (select)
4. Press f4 (menu bar on)
5. Enter "T" to select Tool Menu
6. Enter "I" to select Information Mode
7. Enter "R" to Run
After a few seconds, the Information Tool Log for the CPU will be displayed. The PDC firmware
revision is displayed in the first column.
8. Note the PDC Firmware value
9. Press f2 (done)
10. Press f8 (exit)
11. Press f2 (ok)
B-42 Appendix B