Table of Contents
Advertisement
2-2. Installing the HK-PSU02
c
Before installing the backup power supply unit HK-PSU02
in MKS-8010A, set the POWER switch of HK-PSU02 to
the "O" position (OFF).
Installation
1. Turn off the main power of the MKS-8010A and
disconnect the AC power cord from the outlet.
2. Remove the front panel. (Refer to Section 2-1.)
3. Remove the two screws that fix the blank panel to the
HK-PSU02 installation location, and remove the blank
panel.
PSW3 x 6
PSW3 x 6
n
Store the removed blank panel in a safe place.
4. Insert the HK-PSU02 securely into the deep end.
5. Secure the HK-PSU02 with the two screws.
Indicator
HK-PSU02
PSW3 x 6
Handle
6. Reinstall the front panel.
2-2
Blank panel
2-3. Installing the Operation Modules
2-3-1. Installing Modules
c
Be sure to turn off the POWER switch before starting to
install modules.
1. Installation to the main panel
Applicable modules
. MKS-8013A
32 AUX Bus Module
. MKS-8014A
24 AUX Bus Module
. MKS-8015A
16 AUX Bus Module
. MKS-8017A
32 XPT Module
. MKS-8018A
24 XPT Module
. MKS-8019A
16 XPT Module
. MKS-8020A
Standard Transition Module
. MKS-8021A
Simple Transition Right Module
. MKS-8021ASC
Simple Transition Compact
Right Module
. MKS-8022A
Simple Transition Left Module
. MKS-8022ASC
Simple Transition Conpact
Left Module
. MKS-8023A
Compact Key Transition Module
. MKS-8023AB
Compact Key Transition Module
. MKS-8024A
Flexipad Module
. MKS-8025MS
Memory Stick/USB Module
(Refer to page 2-3.)
. MKS-8026A
10 Key Pad Module
. MKS-8027A
Compact Transition Right Module
. MKS-8028A
Compact Transition Left Module
. MKS-8030A
Key Frame Module
. MKS-8031AJS
Joystick Module
. MKS-8031ATB
Track Ball Module
. MKS-8032A
DSK Fader Module
. MKS-8033A
Utility/Shotbox Module
. MKS-8034ADK DSK/FTB Module
. MKS-8034AFB
FTB Module
. MKS-8035A
Key Control Module
. MKS-8036A
Device Control Module
. MKS-8040
BLANK PANEL (1/3)
. MKS-8041
BLANK PANEL (1/2)
. MKS-8042
BLANK PANEL (1/6)
*1
*2
(Refer to page 2-4.)
CCP-8000 IM
Hide quick links:
Advertisement
Table of Contents
