How To Connect The Cables - Sony MKS-8010A Installation Manual

2-4-2. How to Connect the Cables

Parts required
. 50-pin cable supplied with the center control panel
. 50-pin cable supplied with the MKS-8075A
. USB cable (5 m) supplied with the center control panel
. Shield plate assembly
. PSW2.6 x 5
Connecting cables for the MKS-8075A
1. Connect the EXT PANEL connectors 1 to 3 of the
system control unit MKS-8010A to the SCU IN
connectors of the MKS-8075A using the 50-pin cable
supplied with the center control panel.
2. Connect the SCU OUT connector of the MKS-8075A
to the SCU IN connector of the adjacent MKS-8075A
using the cable supplied with the MKS-8075A, as
shown in the illustration.
3. Regardless of connecting the MKS-8075A or not,
terminate the SCU OUT connector of the MKS-8075A
with the shield plate assembly.
Connecting cables for the MKS-8076
Connect the DEVICE connector of the system control unit
MKS-8010A to the HOST of the MKS-8076 using the
USB cable supplied with the center control panel.
50-pin cable supplied
with the MKS-8075A
MKS-8075A
2-12
50-pin cable supplied with
the center control panel
USB cable supplied with
the center control panel
MKS-8075A
MKS-8076
PSW
Shield plate
2.6 x 5
assembly
MKS-8075A
CCP-8000 IM