Table of Contents
Advertisement
6. Connect the harness of the MKS-8076 to the connector
of the MKS-8025MS (new).
7. Install the MKS-8025MS (new) to the left side of the
MKS-8076, and fix it by tightening the four screws
(with drop-safe) on both sides.
8. Install the module covers.
m
. The number of the MKS-8025MS that can be
connected to the MKS-8010A is only one unit.
. When you want to joint it, install MKS-8025MS at
the top end. (Refer to Fig. 1 (on page 2-8.))
Screws
(with drop-safe)
Connector
MKS-8076
CCP-8000 IM
Module covers
MKS-8025MS
Screws
(with drop-safe)
MKS-8042
2-7
Hide quick links:
Advertisement
Table of Contents
