Sony MKS-8010A Installation Manual page 42

(3) Fix the bottom plate of the adaptor cases at the loca-
tions shown in the illustration using the 4 connecting
screws (BV3 x 10) and 2 of the connecting plates C
for every 2 adaptor cases.
n
When the Vertical connection as described in the
connection method (A) is selected, there are several
locations where the connecting plate C cannot be
fixed, but sufficient installation strength is secured.
BV3 x 10
Adaptor cases
5. Install the side panel.
n
The screw positions that fix the side panel are different
in the connection methods (A), (B) and (C) respective-
ly. (refer to Fig. 2 (on page 2-11).)
6. Install the operation module and fix it by tightening
the four screws on the sides.
2-10
BV3 x 10
Connecting plate C
7. For connection methods (A) and (B) (refer to Fig. 2
(on page 2-11).), install the caps (L) and (R), and the
module cover in the direction of the arrow.
BV3 x 10
Cap (L)
For connection method (C) (refer to Fig. 2 (on page 2-
11).), remove the four stepped screws and install the
panel covers (L) and (R).
Panel cover (L)
Stepped screws
M3
Module covers
Cap (R)
BV3 x 10
Panel cover (R)
Stepped screws
M3
CCP-8000 IM