Sony MKS-8010A Installation Manual page 38

5. Install the operation module to the left-most side of the
MKS-8075A, and fix it with the four screws (with
drop-safe) on both sides.
6. Install the module covers.
Screws
(with drop-safe)
MKS-8075A
2-6
Module covers
Operation module
Screws
(with drop-safe)
MKS-8042
4. Installation of the MKS-8025MS to the MKS-
8076 (Memory Card/USB Adapter)
Applicable module
. MKS-8025MS Memory Stick/USB Module
. MKS-8042
Blank Module (1/6)
Installation
1. Remove the module covers from the both sides of the
MKS-8025MS.
2. Loosen the four screws (with drop-safe) fixing the
MKS-8025MS.
3. Remove the MKS-8025MS by holding the two screws
on the sides of the MKS-8025MS.
4. Disconnect the harness from the MKS-8025MS
connector.
5. Install the MKS-8042 to the right-most side of the
MKS-8076, and fix its left side with the supplied two
screws (PSW3 x 6), and its right side with the two
screws (with drop-safe).
PSW3 x 6
Screws
(with drop-safe)
MKS-8042
MKS-8076
CCP-8000 IM