System Connection; System Connection Of The Mvs-8000 Series - Sony MKS-8010A Installation Manual

1-11. System Connection

1-11-1. System Connection of the MVS-8000 Series

Configure the MVS-8000 series system connection referring to the connection example as shown below.
(This connection example uses MKS-8010A.)
Connection example
Multi Format Switcher MVS-8000A
Reference video
signal
(*2)
Ethernet
switch
(*1) : Connect each LAN (CTRL, DATA) to the separate Ethernet switches respectively.
However, a single Ethernet switch can be used for connecting each LAN.
For information about Ethernet switches that can be used in an MVS system, contact your local Sony Sales Office/Service Center.
For detailed information about setting up the Ethernet switch, refer to the documentation supplied with the switch.
(*2) : Terminate the system with the 75Z terminators supplied. The 75Z terminators are supplied with the equipment.
CCP-8000 IM
Editing Key board
MKS-2050/8050
Reference video signal
Ethernet
switch
(*1) (*1)
VTR DDR
Device Control Unit Pack
DCU-2000-C
BKS-R series
HDS-X series
Multi Format DME Processor
MVE-8000A
(*2)
Audio mixer
Reference video
signal
(*2)
System Control Unit
MKS-8010A
BNC cable
Clossover cable
1-23