3-3. About the Data Backup Capacitor
A large capacitor is installed on the CA-57 board in order
to retain the data such as the setup data, shot box, timeline,
and macro in the MKS-8010A machine.
Leave the main power of the MKS-8010A turned on for
two hours or longer in order to charge this capacitor. The
data is retained for about three days when the capacitor is
fully charged under normal operating temperature and
humidity. However, this period may vary depending on the
storage environment. Be sure to save necessary data in an
external media.
3-4
CCP-8000 IM