Installing The Options; Opening And Closing The Front Panel - Sony MKS-8010A Installation Manual

CCP-8000
The CCP-8000 is shipped from the factory with the neces-
sary modules (see below) already installed in the CCP-8000
in accordance with the system configuration for use.
The following options are available for the CCP-8000.
Model name
MKS-8010A SYSTEM CONTROL UNIT
MKS-8011A MENU PANEL
MKS-8013A 32 AUX BUS MODULE
MKS-8014A 24 AUX BUS MODULE
MKS-8015A 16 AUX BUS MODULE
MKS-8017A 32 XPT MODULE
MKS-8018A 24 XPT MODULE
MKS-8019A 16 XPT MODULE
MKS-8020A STANDARD TRANSITION MODULE
MKS-8021A SIMPLE TRANSITION RIGHT MODULE
MKS-8021ASC SIMPLE TRANSITION
COMPACT RIGHT MODULE
MKS-8022A SIMPLE TRANSITION LEFT MODULE
MKS-8022ASC SIMPLE TRANSITION
COMPACT LEFT MODULE
MKS-8023A COMPACT KEY TRANSITION MODULE
MKS-8023AB COMPACT KEY TRANSITION MODULE
MKS-8024A FLEXIPAD MODULE
MKS-8025MS MEMORY STICK/USB MODULE
MKS-8026A 10 KEY PAD MODULE
MKS-8027A COMPACT TRANSITION RIGHT MODULE
MKS-8028A COMPACT TRANSITION LEFT MODULE
MKS-8030A KEY FRAME MODULE
MKS-8031AJS JOYSTICK MODULE
MKS-8031ATB TRACKBALL MODULE
MKS-8032A DSK FADER MODULE
MKS-8033A UTILITY/SHOTBOX MODULE
MKS-8034ADK DSK/FTB MODULE
MKS-8034AFB FTB MODULE
MKS-8035A KEY CONTROL MODULE
MKS-8036A DEVICE CONTROL MODULE
MKS-8040 BLANK PANEL (1/3)
MKS-8041 BLANK PANEL (1/2)
MKS-8042 BLANK PANEL (1/6)
MKS-8075A EXTENSION ADAPTOR
MKS-8076 MEMORY CARD/USB ADAPTOR
HK-PSU02 BACKUP POWER SUPPLY UNIT
(for MKS-8010A)
CCP-8000 IM
Section 2

Installing the Options

2-1. Opening and Closing the Front
Opening/Closing
1. Turn off the main power of the MKS-8010A and
disconnect the AC power cord from the outlet.
2. Loosen the tow screws (with drop-safe) and remove
the front panel in the direction of the arrow.
Screw
(with drop-safe)
Panel
Front panel
Screw
(with drop-safe)
2-1