Service Lan Addresses - IBM 3746-900 Installation And Maintenance Manual

14. Modify the service LAN addresses as follows:
Note: Press F1 to get details about the input fields.
a. If needed, enter the IP address for the Service Processor, and TIC3 2080
according to the values recorded by the customer on the worksheet
"Definition of Service LAN IP Addresses" on page C-2, otherwise keep
the default values.
Note: The Subnet mask can also be modified for the Service Processor
but it will be automatically updated for the NNPs and TIC3 2080.
b. Enter the UAA/LAA address
c. If a router is connected on the service LAN, enter its IP address.
d. If the customer has defined a LAN manager, change the C&SM LAN ID
according to the LAN NAME specified in the parameter worksheet "Service
Processor LAN Management Definition" on page C-2.
Figure 1-33. Service LAN Addresses
15. Click Next>>, then go to step 16 on page 1-38 (if you selected in step 10 on
page 1-35 to customize the NetView R parameters).
Chapter 1. Installing and Setting Up Your Service Processor
1-37