Installing Label On The Front Side Of The Service Processor; Installing Brackets Pn 58G5752 - IBM 3746-900 Installation And Maintenance Manual

Figure 1-2. Installing Label on the Front Side of the Service Processor
4. If you have a controller expansion, install the Service Processor kit PN
5. Open the front and rear doors of the controller expansion. See Figure F-3 on
6. For the display and the Service Processor, install four brackets 1 (PN
X X
X X
X X
Figure 1-3. Installing Brackets PN 58G5752
7. On the brackets installed for the display and the service processor, install plate
1-10
3745-XXA 1-10 3746-9X0: 6578 SPIM
A
58G5698 (service drawer, brackets, and plates), and go to step 5. Otherwise,
go to step 16 on page 1-14.
page F-4 and locate the positions to install the brackets for the display and the
Service Processor. Also, locate the position to install the service drawer.
58G5752) and secure using eight screws 2 (PN 2665527).
4 (PN 58G5755) using four screws 3 (PN 1621230).
1
2