Installation Scenarios - IBM 3746-900 Installation And Maintenance Manual

Installation Scenarios

Depending on the machine and the MES received, determine which installation
scenario you are going to perform (from Scenario 1 to Scenario 16). See
Table 1-1 on page 1-4 and Table 1-1 on page 1-4 to see how the installation
tasks can be distributed between two service representatives and define which
document must be used to start the installation and have an overview of the
installation sequence.
Note: See Table 1-2 on page 1-4 for more details about each scenario. If you
are installing a 3745 Model 17A, the statements concerning the installation of an
expansion frame and the procedures "CDF verify" and "locate bypass cards
positions" are not applicable.
Note: You can install the 3746-900 first and then connect the Service Processor
and run all diagnostics. Afterward the 3745 can be modified to model A (if
necessary) and connected to the 3746-900
1-3
Chapter 1. Installing and Setting Up Your Service Processor