IBM 3746-900 Installation And Maintenance Manual page 24

Service processor (based on 6578)
Table of Contents

Advertisement

Table 1-1. Installation Scenarios
Machine and/or MES Received
3745 Model 170 or Model 210 to 610
Service Processor
3745 MES model conversion and 3746-900
3745 MES model conversion and 3746-900 and Service Processor
3745 Model 17A or Model 21A to 61A
3745 Model 17A or Model 21A to 61A and Service Processor
3746-900
3746-900 and 3745 MES model conversion
3746-900 and 3745 MES and Service Processor
3746-900 and 3745 Model 17A or 21A to 61A
3746-900 and 3745 Model 17A or 21A to 61A and Service Processor
3746-950 and network node processor
3746-950, Service Processor, and Network Node Processor
3746-900 MES conversion to Model 3746-950 and network node processor
3746-900 MES conversion to Model 3746-950, Service Processor and Network Node
Processor
3746-900 MES installation of APPN and network node processor
Note: The installation sequence given in Table 1-2 can be modified as you are
able to install the 3746-900 first and then connect to the 3745 model A. It is no
more mandatory to start with the 3745 MES (to migrate to model A) or with the
3745 Installation Guide.
Table 1-2 (Page 1 of 3). Installation Scenario Tasks and Documentation
Scenario
CE
Scenario 1
1st
2nd
Scenario 2
1st
Scenario 3
1st
Scenario 4
1st
2nd
Scenario 5
1st
2nd
1-4
3745-XXA 1-4 3746-9X0: 6578 SPIM
Tasks
Install the 3745-XX0 base
frame.
Install expansion frame (if any).
Install the Service Processor.
Install the MES model
conversion.
Install the MES model
conversion.
Install the Service Processor.
Install the 3745-XXA base
frame.
Install expansion frame (if any).
Documentation
3745 Installation Guide
3745 Installation Guide
Service Processor Installation
and Maintenance
MES model conversion XX0 to
XXA
MES model conversion XX0 to
XXA
Service Processor Installation
and Maintenance
3745 Installation Guide
3745 Installation Guide
Scenario
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Installation Sequence
Start with the 3745 IG and
install the 3745-XX0.
Start with the SPIM and
install the SP..
Start with the MES and
connect the 3745 XXA to
the existing SP.
Start with the MES and
using the SPIM install the
SP.
Start with the 3745 IG and
connect the 3745-XXA to
the existing SP.

Advertisement

Table of Contents
loading

Table of Contents