Installing The Service Drawer - IBM 3746-900 Installation And Maintenance Manual

9. See Figure 1-6, on the rear side of the controller expansion, install bracket A
10. On the front side of the controller expansion, slide the drawer B on the
Figure 1-6. Installing the Service Drawer
11. If the Service Processor is installed in the controller expansion, go to step 12.
12. Slide the &SO. unit on the brackets as shown in Figure 1-7 on page 1-13.
1-12
3745-XXA 1-12 3746-9X0: 6578 SPIM
using two screws C (PN 1621230).
bracket A and secure using two screws C (PN 1621230).
A
C
Rear View
Otherwise, go to step 16 on page 1-14.
B
C
Front View