Input/Output Connectors
Cover Removal
|
|
|
|
Cover Replacement
|
|
|
H-2
3745-XXA H-2 3746-9X0: 6578 SPIM
Mouse
USB 2
Keyboard
USB 1
Note: The front panel is integrated with the top cover.
To remove the top cover. firmly press the cover latch buttons on both sides, pull
up the back end of the cover, and swing the cover towards the front of the service
processor.
To replace the top cover, pivot the cover from the front, and move it down over the
service processor until the cover snaps into place.
Parallel
Serial 2
Serial 1
Line In
Microphone
Headphone/
Line Out
DVI
Monitor
SVGA
Monitor