IBM 3746-900 Installation And Maintenance Manual page 25

Table 1-2 (Page 2 of 3). Installation Scenario Tasks and Documentation
Scenario CE Tasks
Scenario 6 1st Install the 3745-XXA base
frame.
2nd Install the Service Processor.
Scenario 7 1st Install the 3746-900 (off line).
2nd Prepare the 3745-XXA: CDF
verify, Bypass Cards
2 Connect the 3746-900 to the
CEs 3745.
Scenario 8 1st Install the MES model
conversion and prepare the
3745-XXA.
2nd Install the 3746-900 (offline.
2 Connect the 3746-900 to the
CEs 3745.
Scenario 9 1st Install the MES model
conversion and prepare the
3745-XXA.
2nd Install the Service Processor.
Install the 3746-900 (offline).
2 Connect the 3746-900 to the
CEs 3745.
Scenario 10 1st Install the 3745-XXA base
frame.
2nd Install expansion frame (if any)
and the 3746-900.
2 Connect the 3746-900 to the
CEs 3745.
Scenario 11 1st Install the 3745-XXA base
frame and the Service
Processor.
2nd Install expansion frame (if any)
and the 3746-900.
2 Connect the 3746-900 to the
CEs 3745.
Scenario 12 1st Install the 3746-950..
2nd Install the Network Node
Processor.
CDF verify - Bypass Cards
CDF verify - Bypass Cards
Chapter 1. Installing and Setting Up Your Service Processor
Documentation
3745 Installation Guide
Service Processor Installation
and Maintenance
3746-900 Installation Guide
3746-900 Installation Guide
3746-900 Installation Guide
MES model conversion XX0 to
XXA 3746-900 Installation
Guide
3746-900 Installation Guide
3746-900 Installation Guide
MES model conversion XX0 to
XXA 3746-900 Installation
Guide
Service Processor Installation
and Maintenance
3746-900 Installation Guide
3746-900 Installation Guide
3745 Installation Guide
3745 Installation Guide
3746-900 Installation Guide
3746-900 Installation Guide
3745 Installation Guide
Service Processor Installation
3745 Installation Guide
3746-900 Installation Guide
3746-900 Installation Guide
3746-950 Installation Guide
Network Node Processor
Installation and Maintenance
Installation Sequence
Start with the 3745 IG and
using the SPIM install and
connect the SP..
Start with the 3746 IG and
install and connect the
3746-900 to the 3745-XXA.
Start with the MES to
convert the 3745 to model
XXA, then using the 3746
IG install and connect the
3746-900.
Start with the 3745 MES
convert the 3745 to XXA
using the SPIM install the
SP, then using the 3746 IG
install and connect the
3746-900.
Start with the 3745 IG and
install the 3745 XXA.
Then, using the 3746 IG,
install the 3746-900. The
machines are connected to
an existing SP.
Start with the 3745 IG and
install the 3745 XXA. Then,
using the SPIM, install the
SP. Using the 3746 IG,
install the 3746-900.
Start with the 3746 IG and
connect the 3746 950 to
the existing SP. Then
using the network node
processor installation and
maintenance, install the
NNP.
1-5