After Hard Disk Drive Exchange - IBM 3746-900 Installation And Maintenance Manual

Service processor (based on 6578)
Table of Contents

Advertisement

After Hard Disk Drive Exchange

Go through the following steps after a hard disk drive exchange.
1. Insert the Diagnostic Diskette.
2. Power on the Service Processor and its attached display.
3. Do not press F1 when the icon appears.
4. Several messages are displayed. Wait until the following panel is displayed.
5. Select Diagnostics in the title bar and press Enter.
6. The following panel is displayed:
7. Select Fixed Disks, then press Enter.
8. The following panel is displayed:
5-12
3745-XXA 5-12 3746-9X0: 6578 SPIM
Diagnostics - Interactive Tests - Hardware Infos - Utility - quit - F1=Help
PC-DOCTOR 2.0 Copyright 1999 Watergate Software. All rights Reserved
Diagnostic tests that check the functionality of your PC.
Use the Cursor keys and ESC to move in menus. Press ENTER to select.
Diagnostics - Interactive Tests - Hardware Infos - Utility - quit - F1=Help
Run Normal Test
Run Quick Test
CPU/Coprocessor
System Board
Video Adapter
Serial Ports
Parallels Ports
Fixed Disks
Diskette Drives
Other Devices
Interactive tests
ZIP Drive
CD-ROM/DVD Drive
Memory Tests - Full
Memory Tests - Quick
Fixed Disk Optimized Test
PC-DOCTOR 2.0 Copyright 1999 Watergate Software. All rights Reserved
Use the Cursor keys and ESC to move in menus. Press ENTER to select.

Advertisement

Table of Contents
loading

Table of Contents