Menus Of The "Run" Menu Level; Code" Menu; Stop" Menu - Siemens SIMATIC VS130 Series Manual

Operator Functions
5.2

Menus of the "RUN" Menu Level

5.2.1

"Code" Menu

With the "Code", you select one of a maximum of 15 codes. You must already have
trained these codes.
Step Display
1 > Code
STOP
Info
ESC OK
2 Run
Code: 01
(trained)
ESC ←↕→ OK
3
C 01 RUN
=SERIES 7
OK:Menu
5.2.2

"STOP" Menu

With "STOP", you stop the evaluation (RUN) and change to the "STOP" menu
level.
5-2
Activity
At the "RUN" menu level on the processing unit, select "Code" with the
arrow buttons M and L and press "OK".
Select the code number (range of values 01 to 15) with the M and L
buttons and press "OK".
"(trained)" indicates that you have already trained a code with this
number.
"(empty)" indicates that there is no trained code with this number.
√
Vision Sensor VS 130
A5E00199459-01