5.2.3
"Info" Menu
With the "Info" menu, you obtain information on the following:
•
the part of the learned code with which the read code will be compared
•
the absolute and relative number of successful read operations
•
the absolute and relative number of unsuccessful read operations
•
the absolute and relative number of read operations with a positive comparison
result
•
the evaluation time required for the code currently being read
•
the relative number of read operations, for which the time available for
evaluation was not adequate
Step
Display
1
Code
STOP
> Info
ESC
2
C 02 MATCH
Off
↓
1/6
Information
Display
Form
No.
1
C 02 MATCH
Off
↓
1/6
1
C 02 MATCH
All
=This can..
←↓→ OK
1/6
1
C 02 MATCH
Pos=6..8
=can←
←↓→ OK
1/6
1
C 02 MATCH
ID=T
=his can ..
←↓→ OK
1/6
Vision Sensor VS 130
A5E00199459-01
Activity
At the "RUN" menu level on the processing unit, select "Info" with the
arrow buttons M and L and press "OK". This opens the first
information screen form.
OK
You can display further information with the arrow buttons L and M
By pressing "OK", you returned to the highest hierarchy level of the
"RUN" menu level.
OK
Description
The value "Off" was set for the Match-Opt parameter of code 2, in
other words, there is no comparison of the codes read.
OK
The value "All" was set for the Match-Opt parameter of code 2, in
other words, the read codes will be compared with the entire learned
code.
The value "Position" was set for the Match-Opt parameter of code 2,
in other words, The read codes are checked to see whether they
contain the string "can" at position 6 to 8.
The value "ID" was set for the Match-Opt parameter of code 2, in
other words,
MATCH-ID has the value "T" and the substring begins with "his can "
(the other characters are no longer visible in the display field).
Operator Functions
5-3