Siemens SIMATIC VS130 Series Manual page 36

Vision sensor

Table of Contents

Operator Functions

Step

Display

Train

Code: 01

(new)

ESC ←↕→ OK

Code

Train?

ESC

Code

Training . .

ESC

Code

Train done.

RUN?

ESC

5-6

Activity

Select the code number with the arrow buttons M and L and press "OK".

"(new)" shows that no code has been trained under this number yet.

"(overwrite)" means that the code trained under this number will be

overwritten when you train again.

To start training, press the "OK" button.

Transport an object with the code to be read and activate the trigger

signal.

Note: The digital output N_OK is set to 1 for the selected time at each

trigger signal (Settings > Ports > Pulsetime menu).

When you press "OK", you switch to RUN mode.

If you press "ESC", the code 01 continues to be trained. You can train

this again or select a different code.

Vision Sensor VS 130

A5E00199459-01

Table of Contents