Table of Contents
Advertisement
5.3.2
"RUN" Menu
The transition to "RUN" means start of the evaluation for the VS 130. The codes
are read and, if required, checked for specified strings.
Step
Display
1
> Train
RUN
Adjust
↓
OK
2
Run
Code: 01
(trained)
ESC ←↕→ OK
01 RUN √
3
C
ID=1P
=ABCDEFG..
OK:Menu
5.3.3
"Adjust" Menu
Step
Display
1
Train
RUN
> Adjust
↓
OK
The following displays are possible:
Display
Description
•
Adjust All
•
Read√
•
X:+6 Y:-1
OK:Finish
-
-
-
-
•
Vision Sensor VS 130
A5E00199459-01
Activity
You are at the "STOP" menu level. Select "RUN" with the arrow buttons
M and L and press "OK".
Select the code number with the arrow buttons M and L and then press
"OK".
•
"(empty)" indicates that there is not yet any trained code with this
number.
•
"(trained)" indicates that you have already trained a code with this
number.
Transport objects with codes and activate the trigger signal.
Activity
You are at the "STOP" menu level. Select "Adjust" with the arrow buttons
M and L and press "OK".
First line: The mode "Evaluate all images" is set (Note: this is the default.).
Second line: The code could be read.
Third line: A general statement about localization of the code is made here:
X:+9
Object at right edge
X:-9
Object at left edge
Y:+9
Object at top edge
Y: -9
Object at lower edge
Fourth line: By pressing "OK", you exit the adjust mode.
Operator Functions
5-7
Advertisement
Table of Contents
