Table of Contents
Advertisement
Product Overview
Features
•
Recognition and decoding data matrix codes according to ECC 200 (with the
exception of base256)
•
Ring flash
•
Installation support by setup software on the PC
•
Up to 5 code readings per second
•
Option of code comparison with up to 15 saved codes
•
Option of filtering and formatting the result
•
To sort the objects, there are 3 digital outputs:
READ, MATCH, N_OK
•
Control via digital I/O and PROFIBUS DP
•
Transfer of results via RS-232 interface and PROFIBUS DP
You will find the technical specifications SIMATIC VS 130 in Appendix A.2
Code Characteristics
Characteristics
SIMATIC VS 130 for
"large code areas"
(6GF1 130-1AA with 6GF2
002-8DA sensor head)
CCD resolution
0.11 mm
Minimum dot size
0.6 mm
(edge length)
Maximum dot size
3.5 mm
(edge length)
Minimum code
dimension (rows *
columns)
Maximum code
dimension (rows *
columns)
1)
With large code dimensions such as 72*72, make sure that the lens used does not cause any
distortion at the edges.
Note
The NUL control character (00
matrix code. Characters located after a NUL character in data matrix code are not
output.
1-2
SIMATIC VS 130 for
"small code areas"
(6GF1 130-2AA with 6GF2
002-8EA sensor head)
0.6 mm
0.35 mm
2 mm
10 *10
48 *48
) shows the end of a read result contained in a data
H
C-/CS-mount
Image width /
640
Image width /
120
Image width /
22
1)
72 *72
Vision Sensor VS 130
A5E00199459-01
Advertisement
Table of Contents
