Siemens SIMODRIVE 611A Installation And Planning Manual page 29

02.98
De–rating as a
All of the specified outputs are valid up to an installation altitude of 1000 m. For
function of the in- an installation altitude > 1000 m, the specified outputs should be reduced ac-
cording to the diagrams below. For installation altitudes > 2000 m
stallation altitude
transformer must be used (refer to Section 2.4).
X
H
100 %
80 %
60 %
40 %
20 %
0 %
Figure 3-3
Caution: P
Table 3-5
Order No.,
pulsed re-
sistor
Integrated
in
Can be
used for
Can be
used for
Pn
P
E
Degree of
protection
Dimension drawings, refer to p. 1-161
1)
The rated insulation voltage depends on the installation altitude.
Siemens AG 1998 All Rights reserved
SIMODRIVE 611 (PJ)
3.2.1 Technical data, supply infeed modules
0 1000 2000 3000
, P and P must be de–rated in the same way.
n s6 max
UE modules with pulsed resistors
Pulsed resistors, technical data
External pulsed External pulsed
resistor 0.3/25 resistor 1.5/25
kW kW
6SN1113– 6SN1113–
1AA00–0DA0 1AA00–0CA0
–
UE module 28 UE module 28
kW kW
Pulsed resistor
– module
6SN1113–
1AB0 –0BA
0.3 kW 1.5 kW
25 kW 25 kW
max
7.5 kWs 180 kWs
max
IP 54 IP20
6SN1197–0AA00 02.98 Edition
1)
P =x P
n altitude H n1000m
P =x P
n altitude H s61000m
P =x
max. altitude H
/100%
1000m
4000 5000
Installation altitude (m)
Internal pulsed Internal pulsed
resistor 0.3/25 resistor 0.2/10
kW kW
–
– UE 10 kW, UE 5 kW
pulsed resistor
module
–
–
0.3 kW 0.2 kW
25 kW 10 kW
7.5 kWs 13.5 kWs
refer to module refer to module
an isolating
/100%
/100%
P
max.
–
–
–
1-29