Direct Setpoint Input (Mdi) - Siemens SINAMICS G120 Function Manual

3.4.9

Direct setpoint input (MDI)

Description
For direct setpoint input (MDI, Manual Data Input), a higher-level control provides the
converter with the position setpoint and traversing profile.
Example 1
The higher-level control specifies the value of the setpoint either as a relative or an absolute
position setpoint:
Figure 3-22
Example 2
The higher-level control selects the mode "Set-up":
Figure 3-23
Basic positioner
Function Manual, 04/2015, FW V4.7 SP3, A5E34257659B AB
Axis with direct setpoint input (MDI) positioning
Set up axis with direct setpoint input (MDI)
Basic positioner
3.4 Commissioning
89