Siemens SIMODRIVE 611A Installation And Planning Manual page 53

02.98
Assignment of the line filters to the UE modules
Table 3-19
Filter components Line filter, 5 kW
Order No. filter module 6SN1111–0AA01–1BA0
Mounting position Any
Module width Refer to Dimension Drawings, Section 12
Filter Filter 3.8 kg
I filter 16 A
rated
P filter 20 W
v
Max. connection cross–sec- 4 mm
tion PE, M6 studs
Terminals, LINE
Line input L1, L2, L3, PE
Terminals, LOAD
output L1, L2, L3, PE
1)
I , fuse 16 A
rated
Cooling Non–ventilated
Radio interference suppres- Cable–borne,
sion limit value Class A
EN 55011
1) The fuse used must have this rated current. Refer to Table 3-10 for recommended fuses.
Siemens AG 1998 All Rights reserved
SIMODRIVE 611 (PJ)
3.5.4 Assignment of the line filters to the UE modules
UE module
5/10 kW
Line filter, 10 kW
6SN1111–0AA01–1AA0
5.7 kg
25 A
20 W
2 2
10 mm
PE, M6 studs
LINE
L1, L2, L3, PE
LOAD
L1, L2, L3, PE
25 A
Non–ventilated
Cable–borne
limit value Class A
6SN1197–0AA00 02.98 Edition
UE module UE module
10/25 kW 28/50 kW
Line filter, 28 kW
6SN1111–0AA01–1CA0
12.5 kg
65 A
W25
2
50 mm
PE, M10 studs
LINE
L1, L2, L3, PE
LOAD
L1, L2, L3, PE
80 A
Non–ventilated
Cable–borne
limit value Class A
3
1-53