Installing The Drive Module And Lcl Filter Module Into A Cabinet - ABB ACQ580-34 Hardware Manual

Step Task
3 Attach the drive module and LCL filter module to
the cabinet
4 Connect the power cables and clear plastic
shrouds to the drive module.
Connect the power supply cable to the LCL filter
cooling fan.
5 Install the external control unit.
6 Connect the control cables.
7 Install the remaining parts, for example, cabinet
doors, side plates, etc.
Installing the drive module and LCL filter module into a
cabinet
See chapter Step-by-step drawings for an installation example in Rittal VX25 800 mm wide
cabinet (page 175) and ACQ580-34 quick installation guide (3AXD50000420025 [English]).
• Attach the plinth to the floor.
• Attach the cabinet frame to the plinth.
• Make the bottom plate with 360-degree grounding entries for power cables.
• Attach the bottom plate to the cabinet.
• Attach the punched section to the back of the cabinet frame.
• Attach the mounting brackets to the punched section.
• Install the pedestal to the LCL filter module.
• Install the cooling fan to the LCL filter module.
• Attach the LCL filter module pedestal guide plate to the cabinet bottom plate.
• Attach the telescopic insertion ramp to the pedestal guide plate.
• To prevent the LCL filter module from falling, attach its lifting lugs with chains to the
cabinet frame.
• Push the LCL filter module carefully into the cabinet along the telescopic insertion ramp.
Work preferably with help from another person as shown below. Keep a constant
pressure with one foot on the base of the module to prevent the module from falling on
its back.
Installation example in Rittal VX25 cabinet 85
For instructions, see
Step-by-step drawings for an installation example
in Rittal VX25 800 mm wide cabinet
Connecting the power cables and installing the
shrouds
Connecting the power cables
Attaching the external control unit
Connecting the control cables to the terminals of
the control unit
The component manufacturer's instructions