Applicable Standards; Markings - ABB ACQ580-34 Hardware Manual

Applicable standards

The drive complies with the following standards.
European electrical safety requirements product standards
EN 61800-5-1:2007
EN 60204-1:2006
+A1:2010
EN 60529:1991 + A2:2013
EN 61800-3:2004 +
A1:2012
UL 508C: 2016
CSA C22.2 No. 0-10
CSA C22.2 No. 14-13
CSA C22.2 No. 274-13

Markings

These markings are attached to the drive:
CE mark
Product complies with the applicable European Union legislation. For fulfilling the EMC requirements,
see the additional information concerning the drive EMC compliance (IEC/EN 61800-3).
UL listed mark for USA and Canada
Product has been tested and evaluated against the relevant North American standards by the Un-
derwriters Laboratories.
EAC (Eurasian Conformity) mark
Product complies with the technical regulations of the Eurasian Customs Union. EAC mark is required
in Russia, Belarus and Kazakhstan.
Electronic Information Products (EIP) green mark
The product complies with the People's Republic of China Electronic Industry Standard (SJ/T 11364-
2014). The product does not contain toxic and hazardous substances or elements above the max-
imum concentration values, and it is an environmentally-friendly product which can be recycled.
RCM mark
Product complies with Australian and New Zealand requirements specific to EMC, telecommunica-
tions and electrical safety. For fulfilling the EMC requirements, see the additional information con-
cerning the drive EMC compliance (IEC/EN 61800-3).
Adjustable speed electrical power drive systems. Part 5-1: Safety requirements –
electrical, thermal and energy
Safety of machinery. Electrical equipment of machines. Part 1: General require-
ments.
Provisions for compliance: The final assembler of the machine is responsible for
installing:
• emergency-stop device
• supply disconnecting device
• IP00 drive module into a cabinet.
Degrees of protection provided by enclosures (IP code)
Adjustable speed electrical power drive systems. Part 3: EMC requirements and
specific test methods
UL Standard for Safety, Power Conversion Equipment, fourth edition
General Requirements - Canadian Electrical Code, Part II
Industrial control equipment
Adjustable Speed Drives
Technical data 121