Type Designation Key - ABB ACQ580-34 Hardware Manual

34 Operation principle and hardware description
2
3
4
5
1 Type designation, see section Type designation key.
2 Name and address of the manufacturer
3 Frame size
4 Cooling method
5 Degree of protection
6 Ratings, see Ratings
7 Short-circuit withstand strength
8 Valid markings
9 Serial number. The first digit of the serial number refers to the manufacturing plant. The next four digits
refer to the unit's manufacturing year and week, respectively. The remaining digits complete the serial
number so that there are no two units with the same number.

Type designation key

The type designation contains information on the specifications and configuration of the
drive. The first digits from left express the basic drive type. The optional selections are given
thereafter, separated by plus signs, for example +E202. Codes preceded by zero (for
example +0J400) indicate the absence of the specified feature. The main selections are
described below. Not all selections are available for all types. For more information, refer
to the ordering instructions available separately on request.
Code Description
Basic code
ACQ580 Product series
Type
When no options are selected: low-harmonic single drive module to be installed in an enclosure,
IP20 (UL open type), bookshelf mounting with pedestal, internal control unit with ACH-AP-H Assistant
control panel with panel holder, build-in LCL filter, full-size output cable connection terminals, internal
-34
EMC filter (+E210), common mode filter (+E208), DC connection busbars, ACQ580 standard pump
control program, RS-485 Modbus RTU adapter module, Safe torque off function, coated boards,
printed multilingual quick installation and start-up guides.
Size
-xxxxA Refer to the rating tables
Voltage range
380...480 V AC. This is indicated in the type designation label as typical input voltage level
-4
(3~ 400/480 V AC)
Option codes (plus codes)
1
7
8
9