Materials; Applicable Standards - ABB ACS800-U1 Hardware Manual

Materials

Drive enclosure
Package
Disposal

Applicable standards

•
EN 60204-1:2018
•
EN 60529:1991
+ corrigendum 1993
+ A1:2000
•
IEC 60664-1:2007
•
EN 61800-3:2004
•
EN 61800-5-1:2007
+A1:2017
•
UL 508C (2002)
•
NEMA 250 (2003)
•
CSA C22.2 No. 274-17
• PC/ABS 2.5 mm, color NCS 1502-Y (RAL 9002 / PMS 420 C)
• hot-dip zinc coated steel sheet 1.5 to 2 mm, thickness of coating 100
micrometers
• cast aluminum AlSi (R2 and R3)
• extruded aluminum AlSi (R4 to R6)
Depends on the frame size and selected options: cardboard, heavy duty
cardboard or plywood, EPS cushions (expanded polystyrene), wooden
pallet
Plastic covering of the package: PE-LD, bands PP or steel.
The main parts of the drive can be recycled to preserve natural resources
and energy. Product parts and materials should be dismantled and
separated.
Generally all metals, such as steel, aluminum, copper and its alloys, and
precious metals can be recycled as material. Plastics, rubber, cardboard and
other packaging material can be used in energy recovery. Printed circuit
boards and DC capacitors (C1-1 to C1-x) need selective treatment according
to IEC 62635 guidelines. To aid recycling, plastic parts are marked with an
appropriate identification code.
Contact your local ABB distributor for further information on environmental
aspects and recycling instructions for professional recyclers. End of life
treatment must follow international and local regulations.
Safety of machinery. Electrical equipment of machines. Part 1: General
requirements. Provisions for compliance:
machine is responsible for installing
- an emergency-stop device
- a supply disconnecting device.
Degrees of protection provided by enclosures (IP code)
Insulation coordination for equipment within low-voltage systems. Part 1:
Principles, requirements and tests.
Adjustable speed electrical power drive systems. Part 3: EMC requirements
and specific test methods
Adjustable speed electrical power drive systems. Part 5-1: Safety
requirements – electrical, thermal and energy
UL Standard for Safety, Power Conversion Equipment, second edition
Enclosures for Electrical Equipment (1000 Volts Maximum)
Adjustable speed drives
Technical data 127
The final assembler of the