A Technical Appendix; Technical Data - Festo CMMS-AS G2 Series Assembly And Installation Manual

A Technical appendix
A Technical appendix
A.1

Technical data

General technical data
Type of mounting
Fault signal
Parameterisation interface
Parameterisation software
Control interfaces
Fieldbus
Digital I/O
Analogue I/O
Protective functions
Controller cycle time
Current regulator
Speed regulator
Position controller
Dimensions and weight
Dimensions (H*W*D)
Weight
Weight with packaging
Approvals
CE marking
(Declaration of conformity
Additional certifications
1) The component is intended for industrial use. Measures for interference suppression may need to be implemented in residential
areas.
Tab. A.1 Technical data, general
44
Screwed to a mounting plate
7-segment display (error code)
RS232 (9600 ... 115 000 bit/s)
Festo Configuration Tool (FCT)
– integrated: CANopen, RS485
– optional: PROFIBUS DP, DeviceNet
– DIN0 ... 13, DOUT0 ... 3
– AMON/AGND, AIN0/#AIN0
– Short circuit in output stage
– Intermediate circuit over/undervoltage
– Temperature monitoring for motor and power
– I
– Standstill monitoring
[μs] 100
[μs] 200
[μs] 400
[mm] 60 x 242 x 160 (incl. clip)
[kg] 1.5
[kg] 1.75
To EC Low Voltage Directive
www.festo.com)
To EC Machinery Directive
To EC EMC Directive
UL/RCM mark/BIA
Festo – GDCP-CMMS-AS-G2-HW-EN – 1310NH – English
section
2
t monitoring
1)