Vibration Response - Siemens SIMOTICS S-1FG1 Operating Instructions Manual

6.11

Vibration response

Vibration stress
To ensure a perfect function and to comply with the servo geared motor specification 1FG1
(particularly the bearing service life) the vibration values listed in the following table must not
be exceeded.
Table 6-21
Vibration velocity / V
Axial vibration acceleration a
Radial vibration acceleration a
Select the measurement points according to ISO 10816-1 Section 3.2. The vibration values
must not exceed the specified limits at any measuring point.
Figure 6-12
The vibration acceleration is evaluated in the frequency band from 10 to 2000 Hz. The
maximum peak value in the time range is considered.
To evaluate the vibration velocity, the measuring equipment must fulfill the requirements of
ISO 2954.
SIMOTICS S-1FG1 servo geared motor
Operating Instructions, 12/2022, A5E47360747B/RS-AC
Vibration values
to ISO 10816
rms
axial
peak
radial
peak
Measurement points on geared motors
Mounting and assembly
6.11 Vibration response
Max. 4.5 mm/s
25 m/s
2
50 m/s
2
123