Installing A 8X 2.5-Inch Hot-Swap Hdd Assembly With Expander Kit - Lenovo System x3650 M5 Installation And Service Manual

SAS signal cables SAS signal cables
(580 / 590 mm) (905 / 950 mm)
Power / configuration Power / configuration SAS signal cables Power / configuration
cable (150 mm) cable (220 mm) (250 mm) cable (220 mm)
BP1 BP1 BP2
SAS 1 SAS 0 SAS 0 SAS 1 SAS 0 SAS 1
Figure 283. Cable routing
Step 9. If you removed the fan cage, install it. (See "Replacing the fan cage assembly" on page 191).
Step 10. Insert the hard disk drives and the fillers the rest of the way into the bays.

Installing a 8x 2.5-inch hot-swap HDD assembly with expander kit

Use this information to install a 8x 2.5-inch hot-swap HDD assembly kit with expander.
You can install a Lenovo System x3650 M5 8x 2.5-inch hot-swap HDD assembly with expander kit to add
eight additional 2.5-inch hot-swap hard disk drives in the server. See http://www.lenovo.com/ serverproven/
for a list of supported optional devices. To order a 8x 2.5-inch hot-swap HDD assembly kit with expander,
contact your sales representative or reseller.
The 8x 2.5-inch hot-swap HDD assembly with expander kit contains the following components:
• Eight 2.5-inch HDD fillers
• One expander
• Two power/configuration cables (230 mm)
• One power/configuration cable (260 mm)
• One Mini-SAS HD Y-cable (580/590 mm)
• One Mini-SAS HD cable (350 mm)
• One Mini-SAS HD cable (150 mm)
318
Lenovo System x3650 M5 Installation and Service Guide