Installing A 8X 2.5-Inch Hot-Swap Hdd Assembly Kit - Lenovo System x3650 M5 Installation And Service Manual

Hide thumbs Also See for System x3650 M5:

Table of Contents

Power / configuration

Figure 275. 8x3.5-inch simple-swap hard disk drive with hardware RAID cabling

Step 10. Replace the fan cage and fans if you removed them (see "Replacing the fan cage assembly" on

page 191 and "Replacing a hot-swap fan" on page 193).

Step 11. Reinstall the hard disk drives (see "Replacing a hot-swap hard disk drive" on page 172).

Step 12. Install the top cover (see "Replacing the top cover" on page 164).

Step 13. Slide the server into the rack.

Step 14. Reconnect the power cords and any cables that you removed.

Step 15. Turn on the peripheral devices and the server.

Installing a 8x 2.5-inch hot-swap HDD assembly kit

Use this information to install a 8x 2.5-inch hot-swap HDD assembly kit.

You can install a Lenovo System x3650 M5 8x 2.5-inch hot-swap HDD assembly kit to add eight additional

2.5-inch hot-swap hard disk drives in the server. See

supported optional devices. To order a 8x 2.5-inch hot-swap HDD assembly kit, contact your sales

representative or reseller.

The 8x 2.5-inch hot-swap HDD assembly kit contains the following components:

• Eight 2.5-inch HDD fillers

• One hot-swap backplane

• One power/configuration cable (150 mm)

SAS signal cable

http://www.lenovo.com/ serverproven/

Installing, removing, and replacing components

for a list of