Lenovo System x3650 M5 Installation And Service Manual page 249

11. Replace the fan cage assembly (see "Replacing the fan cage assembly" on page 191).
12. Replace the top cover (see "Replacing the top cover" on page 164).
13. Slide the server into the rack.
14. Reconnect the power cords and any cables that you removed.
15. Turn on the peripheral devices and the server.
For the left EIA assembly
1. Read the safety information that begins on "Safety" on page v and "Installation guidelines" on page 305.
2. Turn off the server and peripheral devices, and disconnect the power cord and all external cables.
3. Remove the top cover (see "Removing the top cover" on page 162).
4. Remove the fan cage assembly (see "Removing the fan cage assembly" on page 190).
5. Route the cable into the slot.
Figure 181. Cable routing
6. Align the EIA assembly with the alignment pin and push it slightly toward the rear of the server fix the EIA
assembly on the server.
EIA assembly
.
Chapter 5 Installing, removing, and replacing components
237