Lenovo System x3650 M5 Installation And Service Manual page 194

Class 1 Laser Product
Laser Klasse 1
Laser Klass 1
Luokan 1 Laserlaite
`
Appareil A Laser de Classe 1
Step 6. Touch the static-protective package that contains the new optical drive to any unpainted metal
surface on the server; then, remove the optical drive from the package and place it on a static-
protective surface.
Step 7. Follow the instructions that come with the drive to set any jumpers or switches.
Step 8. Attach the drive retention clip that you removed from the optical drive filler panel to the side of the
new optical drive.
Figure 103. Optical drive retention clip installation
Step 9. Align the optical drive in the drive bay and slide the optical drive into the optical drive bay until the
optical drive clicks into place.
Drive retainer clip
Figure 104. Optical drive installation
Step 10. Connect the optical drive cable (see "Replacing the optical drive cable" on page 178).
Step 11. Reconnect the power cords and any cables that you removed.
Step 12. Turn on the peripheral devices and the server.
182
Lenovo System x3650 M5 Installation and Service Guide
Drive retention clip
Alignment pins