Figure 184. Screw installation
9. Connect the front video cable to the system board.
Front video cable
Figure 185. Cable connection
10. Replace the fan cage assembly (see "Replacing the fan cage assembly" on page 191).
11. Replace the top cover (see "Replacing the top cover" on page 164).
12. Slide the server into the rack.
13. Reconnect the power cords and any cables that you removed.
14. Turn on the peripheral devices and the server.
3.5-inch model
There are the right EIA assembly and the left EIA assembly on the server, use the following steps to replace
them.
For the right EIA assembly
1. Read the safety information that begins on "Safety" on page v and "Installation guidelines" on page 305.
Screws
.
Chapter 5
Installing, removing, and replacing components
239