Removing The Coin-Cell Battery (Also Called Cmos Battery) - Lenovo System x3650 M5 Installation And Service Manual

Hide thumbs Also See for System x3650 M5:
Table of Contents

Advertisement

Step 5.
Align the flash device with the connector on the system board and push it into the USB connector
until it is firmly seated.
Figure 211. USB hypervisor flash device installation
Step 6.
Reconnect the power cords and any cables that you removed.
Step 7.
Replace the top cover (see "Replacing the top cover" on page 164).
Step 8.
Slide the server into the rack.
Step 9.
Turn on the peripheral devices and the server.

Removing the coin-cell battery (also called CMOS battery)

The following notes describe information that you must consider when replacing the battery.
• Lenovo has designed this product with your safety in mind. The lithium battery must be handled correctly
to avoid possible danger. If you replace the battery, you must adhere to the following instructions.
Note: In the U. S., call 1-800-IBM-4333 for information about battery disposal.
• If you replace the original lithium battery with a heavy-metal battery or a battery with heavy-metal
components, be aware of the following environmental consideration. Batteries and accumulators that
contain heavy metals must not be disposed of with normal domestic waste. They will be taken back free
of charge by the manufacturer, distributor, or representative, to be recycled or disposed of in a proper
manner.
• To order replacement batteries, call 1-800-IBM-SERV within the United States, and 1-800-465-7999 or 1-
800-465-6666 within Canada. Outside the U.S. and Canada, call your support center or business partner.
Note: After you replace the battery, you must reconfigure the server and reset the system date and time.
Statement 2
264
Lenovo System x3650 M5 Installation and Service Guide
USB embedded
hypervisor
flash device

Advertisement

Table of Contents
loading

Table of Contents