Setting Up The Xcalibur Instrument Configuration; Adding The Ms Detector To The Xcalibur Instrument Configuration - Thermo Scientific ETD Getting Started Manual

For the ltq xl and ltq velos ms detectors (compatible with ltq orbitrap xl and ltq orbitrap velos)

Table of Contents

Setting Up the Xcalibur Instrument Configuration

Thermo Scientific

Follow these procedures to add the LTQ XL or LTQ Velos MS detector and the reagent ion

source (ETD module) to the Xcalibur instrument configuration and to specify some of their

configuration options.

•

Adding the MS Detector to the Xcalibur Instrument Configuration

•

Specifying the Reagent Ion Source for the MS Detector

To control the ETD source and the LTQ XL or LTQ Velos MS detector from the Xcalibur

data system, add these devices to the Xcalibur instrument configuration.



To add the MS detector to the list of configured devices

1. Close the Xcalibur data system and Tune Plus application.

2. On the Windows taskbar, choose Start > Programs > Thermo Foundation 1.0 >

Instrument Configuration

Note For Xcalibur data system version 2.0.7 or earlier, choose Start > Programs >

Xcalibur > Instrument Configuration.

(Figure

2).

MS/ETD System Getting Started Guide

Table of Contents