Thermo Scientific ETD Getting Started Manual page 2

© 2010 Thermo Fisher Scientific Inc. All rights reserved.
EASY-nLC, LTQ Velos, and LTQ XL are trademarks, and Xcalibur is a registered trademark of Thermo Fisher
Scientific Inc. in the United States.
Convectron is a registered trademark of Helix Technology Corporation.
Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and other
countries.
All other trademarks are the property of Thermo Fisher Scientific Inc. and its subsidiaries.
Thermo Fisher Scientific Inc. provides this document to its customers with a product purchase to use in the
product operation. This document is copyright protected and any reproduction of the whole or any part of this
document is strictly prohibited, except with the written authorization of Thermo Fisher Scientific Inc.
The contents of this document are subject to change without notice. All technical information in this
document is for reference purposes only. System configurations and specifications in this document supersede
all previous information received by the purchaser.
Thermo Fisher Scientific Inc. makes no representations that this document is complete, accurate or error-
free and assumes no responsibility and will not be liable for any errors, omissions, damage or loss that might
result from any use of this document, even if the information in the document is followed properly.
This document is not part of any sales contract between Thermo Fisher Scientific Inc. and a purchaser. This
document shall in no way govern or modify any Terms and Conditions of Sale, which Terms and Conditions of
Sale shall govern all conflicting information between the two documents.
Release history: Revision A, March 2008; Revision B, January 2009; Revision C, December 2010
Software version: Xcalibur 2.1.0 or earlier, LTQ Series 2.6.0 SP2 or earlier
For Research Use Only. Not for use in diagnostic procedures.